Hakeden fillers (Tri-Packs: Terry Parker) is a new type of packing product developed by German Raschig group (now affiliated to PMC Global Group Corporation). The German patent is called Hackectten (translated by Haas, Hakeden), and the domestic also known as the ball with gluten, star ring, environmental protection. Packing and so on. The product can be used for general gas absorption and purification as well as filler for demister.
The structure of the Hakeden packing is that there is no large surface in the body of the packing body, but a hollow sphere composed of many grille like branches, and the structure of the water rod is added inside the sphere.
Environmental filter ball packing is based on the concept that only a filler with a larger solid surface has the efficiency of friendship, because sometimes a filler with a larger solid surface produces a larger pressure drop and an easy jam, but the mass transfer process between the gas and liquid is only in the form of a mass transfer process. The edges of these surfaces, etc. At the bottom of a large number of surfaces is often dry, where gas can only contact the dry surface; at the top of a large surface it is wet, and the gas passes through. Therefore, it is important for mass transfer only at the edge or Zui. So the structure of this kind of packing is not made up of some large surface, but is connected by a lot of grille like branches to form a ball. It provides a lot of flow and dispersing edge for the liquid. It can not only make the surface of the packing very well wetted, but also make the liquid form a lot of micro, which can promote the surface of the liquid more. It is beneficial to the mass transfer between the two phases of the gas and liquid.
The characteristics of Hakeden packing:
1. A symmetrical water rod is added.
2. The specific surface area is large.
3, very low pressure drop;
4, high operating ability;
The advantages of Hakeden packing:
1, high gas velocity, high heat transfer rate;
2. Excellent performance of gas and liquid separation;
